Lawn Mowers | 3 Mowing Strategies To Ensure Minimal Equipment Damage In Wet Weather

While it isn't advised that you mow your lawn when the weather is wet, prolonged spells of rain force you to do so anyway in some situations. Lawn mowers are typically prone to more damage if you mow wet grass, but you can undertake some strategies to ensure minimal damage in damp conditions.

Clean The Blades Immediately After Mowing

Keep in mind that wet grass clippings will cling to the blades of a lawn mower, which will end up making them blunt prematurely if you're not careful. Once you finish mowing your grass lawn, make sure you clean the blades immediately to prevent any long-term damage. If the lawn mower comes with a washing port, then make sure you use it to wash down the blades. Use a putty knife to scrape any residual grass clippings off the blades to make sure that grass and debris don't remain embedded on them. If possible, sharpen your blades before every mowing session for a crisper and healthier grass cut. This is particularly vital when the weather is damp because blunter blades will more likely tear the grass, instead of cutting it.

Mow More Frequently To Prevent The Grass From Growing Too Long

While you probably have a specified frequency for mowing in dry weather conditions, wet weather poses a different challenge because of the premature damage they can cause to lawn mowers. On its own, tall grass is hard to cut in regular conditions. When you add wetness, the problem gets compounded. To protect your lawn mower, you should ideally mow the grass more frequently because this prevents it from growing too long and getting caught up in the blades of lawn mowers.

Use Fuel Stabiliser To Protect Fuel Inside Your Lawn Mower

You should ideally avoid filling your lawn mower with too much fuel because you run the risk of fuel contamination. Moreover, fuel can get contaminated in conditions with excess moisture because water starts to mix with it. Apart from contamination, excessive moisture in the fuel tank can result in corrosion and rust formation. To prevent this from happening, mix fuel stabiliser with your fuel to protect it. Fuel stabiliser is a special additive for stabilising fuel performance in challenging conditions. It also has water removal properties, which makes it a good addition to fuel in lawn mowers during wet conditions.

If you're thinking of mowing your lawn when the weather is wet, follow these strategies to ensure minimal damage to your home's lawn mowers. Contact companies like Cox Mowers for more information or assistance.


Share